Big Button TV Remote for Seniors Simple Easy to Use, Dementia Products for Elderly Seniors

Product Description

Importance Notes:

Notes 1：This Remote Control only Works for a device via infrared technology, such as a TV set – top box, DVD player, or other electronic device.

Notes 2：How do I know if my original remote/device is infrared?

Method 1: Check the remote control’s physical appearance directly.

Infrared Remote Control usually have IR signal lamp outside the remote control.

Method 2: Determine if a Remote Control is Infrared (IR) Using a Smartphone

Use the Smartphone Camera (Works for Most Phones)

Step 1：Open your phone’s camera (regular photo mode, no special settings needed).

Step 2：Point the remote’s IR emitter (usually at the front) directly at the phone’s camera lens.

Step 3：Press and hold any button on the remote (e.g., power or volume), while observing the phone screen:

If you see a white or purple light from the remote’s emitter → It is an infrared (IR) remote.

If no light appears → It may be a Bluetooth/RF remote (further verification needed).

Notes 3：This Remote Control Not Work for bluetooth, Voice or radio frequency (RF) communication devices, such as Virgin TV boxes, Xfinity, Sky Q remotes.

Notes 4：Need the Original Remote Control to finish the pairing.

Notes 5：During the programming, If the Our Remote LED light does not flash,please move the remote control up down left and right to ensure the windows of both IR signal light are aligned until our remote flashes then you can proceed to the next step of learning.

Notes 6：The learning remote control will exit learning state if there is no any button is pressed in 10 seconds.

Manual

Before operation, make sure that you have installed 2xAAA batteries into the learning remote control.

Instruction Manual

Step 1

Hold the sending end of the original remote – control aiming at the receiving end of Learning Remote. (distance 2cm – 5cm)

Step 2

Press ‘POWER’ and ‘CH A’ buttons simultaneously. The LED will start blinking constantly, the learning system is on.

Step 3

Press the button of learning remote control (such as POWER button) until the LED stop blinking and keep lighting up, release the button.

Step 4

Press the button of the original remote control and hold about 3 seconds (such as POWER button), when receiving the correct data, the LED will blink 3 times quickly and then turn into blinking constantly, then release the button of the original remote control.

Step 5

To learn other buttons, repeat Step 3 + Step 4.

Step 6

Exit When learning is completed, press ‘POWER’ and ‘CH A’ buttons simultaneously again to exit learning state, the LED off.

【Infrared TV remote control】This Remote Control only Works for a device via infrared technology, Not Work for bluetooth, Voice or radio frequency (RF) communication devices, such as Virgin TV boxes, Xfinity, Sky Q remotes. Kindly Review the A+ Description detail Content setup for the remote control.
【The perfect gift for seniors】: Ideal for grandparents, the elderly, people with dementia, the visually impaired, or those with mobility issues. Simplifies daily life. Give your loved ones a simpler TV experience and easy access to entertainment.
【Require a quick setup with your original remote 】Setup guide: Step 1: Point the front of the original remote toward the learning remote (2-5cm apart). Align the infrared sensors. Step 2: Press and hold POWER+CH UP on the learning remote until the LED flashes steadily (learning mode activated).
Step 3: Press and hold the desired key (e.g., POWER) on the learning remote until the LED stays lit, then release. Step 4: Press and hold the same key on the original remote for more than 2 seconds—the LED will blink 3 times and then resume flashing (then release). Step 5: Repeat steps 3-4 for other keys. Step 6: Press POWER+CH UP simultaneously to exit (the LED turns off).
Notes: 1. If a key doesn’t work, repeat its learning process. 2. Learning mode automatically stops after 10 seconds of inactivity.【Hassle-free Service】365-day warranty: If you have any setup questions, please contact us. We will respond to all inquiries within 12 hours.